Construction solid with great robustness and an integral welding system together with the balanced dynamic of its rotors and low speed, guarantees safe and silent operating.
Transmission by means of elastic coupling for total protection of the motor from possible vibrations and stresses.
Security systems in all doors and accesses while some of its mechanisms are in motion.
Automatic system using a clamping screen by means of pneumatic clamps, guaranteeing a uniform clamping and tensioning of the same with a considerable saving of time, since neither a frame nor tools are not needed to change it.
Maintenance with access to a fast and practical grinding chamber thanks to its two large doors provided with a double isolation chamber to reduce the noise level as much as possible. They are supported on wheels with ball bearings that slide on a rail to avoid unnecessary efforts and facilitate maintenance and replacement of screens and hammers.
Construction solid, highly robust and integral welding system together with the dynamic and static balance of its rotor; it guarantees safe and reliable operating.
Transmission by means of elastic coupling for total protection of the motor from possible vibrations and stresses.
Security systems in all doors and accesses while some of its mechanisms are in motion.
Automatic system using a clamping screen by means of pneumatic clamps, guaranteeing a uniform clamping and tensioning of the same with a considerable saving of time, with no need for equipment or tools to change it.
Actuator with rack pinion type rotation for the automatic change of the deflection screen according to the rotor rotation direction.
Maintenance with access to a fast and practical grinding chamber thanks to its two large doors provided with a double isolation chamber to reduce the noise level as much as possible. They are supported on wheels with ball bearings that slide on a rail to avoid unnecessary efforts and facilitate maintenance and replacement of screens and hammers.
Construction Robust monobloc body made of electrowelded sheet steel.
Vertical rotor statically and dynamically balanced with two points of support at the top and bottom of the rotor, completely separated from the main engine by means of an elastic coupling, achieving a total protection of vibrations and stresses on the engine.
Maintenance easy and fast thanks to the 4 side doors, that permit comfortable access to the grinding chamber when changing hammers and screens, pneumatically operated. Security system in all access doors.
